Schlage Bottom
 |
 Schlage Bottom Pin Set 0 9 Locksmith Re Key Pinning  US $40.50
|
 200 Schlage Bottom Pin 0 Rekey Pin Rekeying Pin Kit US $4.95
|
 200 Schlage Bottom Pin 1 Rekey Pin Rekeying Pin Kit US $4.95
|
 200 Schlage Bottom Pin 2 Rekey Pin Rekeying Pin Kit US $4.95
|
 200 Schlage Bottom Pin 3 Rekey Pin Rekeying Pin Kit US $4.95
|
 200 Schlage Bottom Pin 4 Rekey Pin Rekeying Pin Kit US $4.95
|
 200 Schlage Bottom Pin 5 Rekey Pin Rekeying Pin Kit US $4.95
|
 200 Schlage Bottom Pin 6 Rekey Pin Rekeying Pin Kit US $4.95
|
 200 Schlage Bottom Pin 7 Rekey Pin Rekeying Pin Kit US $4.95
|
 200 Schlage Bottom Pin 8 Rekey Pin Rekeying Pin Kit US $4.95
|
 200 Schlage Bottom Pin 9 Rekey Pin Rekeying Pin Kit US $4.95
|
 100 Schlage Bottom Pin 0 Rekey Pin Rekeying Pin Kit US $3.00
|
 100 Schlage Bottom Pin 1 Rekey Pin Rekeying Pin Kit US $3.00
|
 100 Schlage Bottom Pin 2 Rekey Pin Rekeying Pin Kit US $3.00
|
 100 Schlage Bottom Pin 3 Rekey Pin Rekeying Pin Kit US $3.00
|
 100 Schlage Bottom Pin 4 Rekey Pin Rekeying Pin Kit US $3.00
|
 100 Schlage Bottom Pin 5 Rekey Pin Rekeying Pin Kit US $3.00
|
 100 Schlage Bottom Pin 6 Rekey Pin Rekeying Pin Kit US $3.00
|
 100 Schlage Bottom Pin 7 Rekey Pin Rekeying Pin Kit US $3.00
|
 100 Schlage Bottom Pin 8 Rekey Pin Rekeying Pin Kit US $3.00
|
 100 Schlage Bottom Pin 9 Rekey Pin Rekeying Pin Kit US $3.00
|
How do I remove this schlage non-locking doorknob? I believe the model is elan?
I pressed a pencil into the hole to remove the two handles and "rose," I pried off the two metal covering/shells with a screwdriver, I unscrewed the screws on the very top and bottom (now there are two clear small holes running through the door), but I still can't remove the lock. I am confronted with a barrel, which I can see straight through, and at the base of the barrel on each side, there are screw-like grooves on a cylindrical barrel (sort of hexagonal not cylindrical since ends of circle are cut off) and this perhaps seems to be preventing removal. I've tried pryingthe whole unit off to see if it's free yet, but to no avail. What am I doing wrong? Thanks!
The housing in the large hole slides out and a groove on that housing disengages from two flanges on the latch housing.
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.